Daiwa Steez 2508 problem

[alextop]

Привіт, друзі, вибачте, але я повинен пояснити свою проблему англійською мовою Будь ласка, допоможіть мені

Hello friends,

I'm desperately seeking expert advice regarding an issue I've been facing lately with my Daiwa Steez(parcticlty Exist) 2508.

Problem:There is some very disturbing noise of the gears when turning the handle. I also feel there is slightly loose space on the handle.
I sent the reel to our local experts for maintenance but nobody is able to identify the root cause behind this problem. We changed the bearings with Hedgehock, tried different types of grease(even high end ISO factory, Ardent,etc) but the noise still remains. We tried to adjust the internal washers ( http://oi59.tinypic.com/5n6j2b.jpg ) but this didn't help also(although it changes the way the reel works).

There isn't any visible wear on the mechanical parts(gears.main shaft,etc).

On the below video you can hear the terrible noise( please turn up your volume as the sound quality is poor).

https://www.youtube.com/watch?v=EctLY5U ... e=youtu.be

Have you ever faced similar issue with daiwa R4 reels and can you suggest possible solution for fixing this problem?

Can you tell me if there is part number 84 on the picture or it's missing ? We've might lost it and this causes loose space?
http://i57.tinypic.com/wb287a.jpg

Steez 2508 schema :
http://daiwafishing.com.au/wp-content/u ... Z-2508.pdf

Your help and advice would be much appreciated!

Thanks in advance for your cooperation,
Alex
Bulgaria

[Jakal]

Good afternoon.
I read your letter, and studied photos and watched the video.
In your case there is a problem of wear gear drive, causing unexpected sound. Item number 84 does not have a strong relationship to the problem at work. It reduces noise idler gear.
In your case you need to change the main drive and make the correct setting.
Other actions to nothing lead.
Max

[alextop]

Thank you for the feedback?
Which part is worn/defective as per your opinion?
Do we have the 84 part in place or it's not on (check the picture) ?

Alex

[Jakal]

You do not need to change the item number 84 you have it.
To work correctly, you need to replace items 85 and 60, and possibly 79, 80. But the most important thing! After installation and replacement of parts properly to configure it, so there was no similar problems in the future.
Max

[alextop]

Thank you,Max!
Replacing the mentioned parts will cost too much. I will try to get my friends Steez and place his parts in order to check if there is any wear of the gears.

[Jakal]

Such work as a drive on your video caused by the incorrect work exclusively gears (main pair). If your fishing reel new, it must be configured. If it was in use not a short time, then you need to change those parts that I mentioned. Other problems you do not have to grease and this is irrelevant.
Max

[alextop]

Max, the Steez is about 2-3 years old, used mainly for UL/L fishing. The strange thing is there is no visible wear on those parts- they look as new to me. Anyway, I'll try to replace with my friend's parts and update you with the outcome.

Thanks again,
Alex

[alextop]

Issue is fixed after some adjustments! Thanks again,Max!